100A Panel
Right for small homes, condos, and seasonal cabins running basic lighting, appliances, and HVAC. Minnesota minimum for new builds in most municipalities is 150A, so a 100A is typically a like-for-like swap.
Electrical Panel Upgrade Installation
Fast, code-compliant electrical panel upgrades for Twin Cities homes. Eliminate tripping breakers, support EV chargers, and protect your home from electrical hazards.
Expert Electrical Panel Upgrade Installation for Twin Cities Homeowners
Professional Electrical Panel Replacements
Northern Mister Sparky delivers fast, code-compliant panel upgrades across Minneapolis, St Paul, and the greater Twin Cities. Every job is installed right the first time by trusted local electricians, permitted with the city, and inspected before we close out.
Is your electrical panel putting your home at risk? Flickering lights, tripped breakers, or a panel that smells like it’s overheating - these aren’t minor issues. They’re warning signs that your system is outdated or overloaded.
When to Upgrade
If you’re adding an EV charger, finishing a basement, or installing central AC, your existing panel may not have the headroom. We size every upgrade to your actual and projected loads, not a generic spec.
Schedule a free in-home panel assessment with one of our licensed electricians. We’ll inspect your existing service, talk through your goals, and quote the work in writing before we touch a wire.
What's Included
-
New 200-amp main panel (Square D or equivalent)
-
All new breakers, labeled and tested
-
Whole-home surge protection option
-
Permit pulled, inspection scheduled
-
Coordination with Xcel for the meter cut and reconnect
-
Old panel removal and proper disposal
-
Code-compliant grounding and bonding
24/7 Dispatch
Urgent Issue?
If you smell burning, see sparks near your panel, or lose power to part of your home, call us immediately.
Emergency Service- Same-day appointments most days
- UWIN® 100% satisfaction guarantee
- Flat-rate pricing in writing first
Pick Your Type
Each option below installs and supports different homes. Compare visually or scroll down for the full breakdown.
150A Panel
The default for most Twin Cities single-family homes. Supports modern HVAC, a hot tub, and one Level 2 EV charger without straining the service.
200A Panel
Future-proof for larger homes, two EV chargers, electric-only kitchens, and full home automation. Most new construction we touch is specced at 200A.
Or compare at a glance:
100A Panel +
Right for small homes, condos, and seasonal cabins running basic lighting, appliances, and HVAC. Minnesota minimum for new builds in most municipalities is 150A, so a 100A is typically a like-for-like swap.
- Like-for-like replacement of an aging 100A panel
- All breakers labeled and load-tested
- Permit and inspection included
- Best for under 1,200 sq ft homes with no major add-ons planned
150A Panel +
The default for most Twin Cities single-family homes. Supports modern HVAC, a hot tub, and one Level 2 EV charger without straining the service.
- 150A main breaker, 30-40 circuit capacity
- Whole-home surge protection ready
- Supports one EV charger + electric range + central AC
- Best for 1,200 to 2,500 sq ft homes
200A Panel +
Future-proof for larger homes, two EV chargers, electric-only kitchens, and full home automation. Most new construction we touch is specced at 200A.
- 200A main breaker, 40+ circuit capacity
- Headroom for solar tie-in and battery backup
- Supports two EV chargers + electric range + heat pump
- Best for 2,500+ sq ft homes or any planned electrification
Signs You Need This Service
Don't wait for a failure. Watch for these critical warning signs that your electrical system is struggling.
Tripping Breakers
If breakers trip when you run the microwave and AC together, your panel is undersized for modern loads.
Flickering Lights
Dimming lights when appliances cycle on indicate loose connections or an overloaded panel.
Fuse Box Still in Use
Pre-1970s fuse boxes are no longer code-compliant and won't support EVs, hot tubs, or modern HVAC.
Free, no-obligation
Get a same-day quote on your panel upgrade installation.
Tell us what's going on and a licensed Northern technician will call you back within the hour, weekdays.
Frequently Asked Questions
How long does a panel upgrade take? +
Most residential panel upgrades take one full day, including the Xcel power-cut and city inspection.
Do I need a 200-amp panel? +
For most homes built after 1990, yes. Older homes with 100-amp service often need an upgrade to support EVs, central AC, and modern kitchens.
Will I lose power during the upgrade? +
Yes - power is out for 4-6 hours typically. We coordinate with Xcel and the city to minimize the window.
Is financing available? +
Yes - 0% APR for 24 months on qualifying jobs. Pre-qualify in 60 seconds with no credit-score impact.
Is the work guaranteed? +
Yes - backed by the UWIN 100% satisfaction guarantee and a manufacturer warranty on the panel itself.
What Your Neighbors Are Saying
JM
James M. - St. Paul
"Northern Mister Sparky was on time, clean, and walked me through every step. The technician treated my home like his own."
ST
Sarah T. - Bloomington
"Honest pricing, no upsell, and the work was done right the first time. I'll call them for every electrical job from now on."
DL
David L. - Minneapolis
"Booked online, tech arrived in the window promised, and the price matched the quote exactly. No malarky."
Local to every Twin Cities ZIP
Dispatched daily across the metro.
Based in Ramsey, on the road in under five minutes. The cities below have dedicated local landing pages. Don't see yours? Call us anyway - we serve the whole 55-zip area.
UWIN®
100% Satisfaction Guarantee
If you're not happy, we make it right.
The UWIN 100% Satisfaction Guarantee
Our commitment to excellence is absolute. If you are not 100% satisfied with our work, we will do whatever it takes to make it right. Our technicians are background-checked, drug-tested, and trained to the highest standards in the industry.
Ready for a Power Upgrade?
Secure your home's future today. Professional, code-compliant installations are just a click or call away.